Abstract
Metals are the best engineering materials owing to their superior conductivity, mechanical properties, and formability. However, they can be highly affected by environmental elements like oxygen, chlorine, etc. This reaction of metals with the environmental elements will indeed alter their electrical, chemical, and mechanical properties. To protect against corrosion, various protection methods such as electroplating have been established. The presence of anodic or cathodic films on the substrate surface protects steel from corrosion damage at ambient atmospheric temperature. This work focuses on the effect of temperature on the oxidative (corrosion) rate of non-plated, nickel-plated, and chrome-plated ASTM A283GC mild steel samples. A temperature range of 200–800 °C and a total heating time of 120 min were considered in this experiment. A temperature-regulated muffle furnace with a maximum heating capacity of 1000 °C has been used. Weight changes were determined every 30 minutes of heating using a digital weight balance with a precision of 0.001 g. The obtained experimental results of non-plated, nickel-plated, and chrome-plated mild steel samples were analyzed and compared with each other. The effect of oxidation on the surface hardness has also been studied with the help of a Vickers hardness testing machine. Changes in the physical nature of the samples caused by oxidation were also observed and pictured using a camera.
References
Akhtar, M., Lohchab, A., Singh, D., Kumar, R., Gaur, P., & Yadav, B. (2023). Experimental studies on the effect of chromium plating on the mechanical properties of SAE 4140 steel. Materials Today: Proceedings, 72, 2488–2496. https://doi.org/10.1016/j.matpr.2022.09.527
Aliofkhazraei, M. (2014). Developments in corrosion protection. IntechOpen. https://doi.org/10.5772/57010
Andrade, C., & Alonso, C. (2001). On-site measurements of corrosion rate of reinforcements. Construction and Building Materials, 15(2-3), 141-145. https://doi.org/10.1016/S0950-0618(00)00063-5
Apostolopoulos, C. A., & Papadakis, V. G. (2008). Consequences of steel corrosion on the ductility properties of reinforcement bar. Construction and Building Materials, 22(12), 2316-2324. https://doi.org/10.1016/j.conbuildmat.2007.10.006
Burnett, P. J. & Rickerby, D. S. (1987). The relationship between hardness and scratch adhession. Thin Solid Films, 154(1-2), 403-416. https://doi.org/10.1016/0040-6090(87)90382-8
Chen, R., & Yeun, W. (2003). Review of the high-temperature oxidation of iron and carbon steels in air or oxygen. Oxidation of Metals, 59, 433–468. https://doi.org/10.1023/A:1023685905159
Chen, X. B., Easton, M. A., Birbilis, N., Yang, H. Y. & Abbott, T. B. (2013). Corrosion-resistant electrochemical plating of magnesium (Mg) alloys. In Song, G. L. (Ed.), Corrosion prevention of magnesium alloys (pp. 315-346). Woodhead Publishing Limited. https://doi.org/10.1533/9780857098962.3.315
Fotovvati, B., Namdari, N., & Dehghanghadikolaei, A. (2019). On coating techniques for surface protection: A review. Journals of Manufacturing and Materials Processing, 3, 28. https://doi.org/10.3390/jmmp3010028
Frankel, G. S. (1998). Pitting corrosion of metals: a review of the critical factors. Journal of The Electrochemical Society, 145(6), 2186-2198. https://doi.org/10.1149/1.1838615
Hou, B., Li, X., Ma, X., Du, C., Zhang, D., Zheng, M., Xu, W., Lu, D., & Ma, F. (2017). The cost of corrosion in China. npj Materials Degradation, 1(1), Article 4. https://doi.org/10.1038/s41529-017-0005-2
Kanani, N. (2004). Electroplating: basic principles, processes and practice. Elsevier Ltd. https://doi.org/10.1016/B978-1-85617-451-0.X5000-3
Klapper, H. S., Zadorozne, N. S., & Rebak, R. B. (2017). Localized corrosion characteristics of nickel alloys: A review. Acta Metallurgica Sinica (English Letters), 30, 296–305. https://doi.org/10.1007/s40195-017-0553-z
Lu, K. (2010). The future of metals. Science. 328(5976), 319-320. https://doi.org/10.1126/science.1185866
Lunk, H. J. (2015). Discovery, properties and applications of chromium and its compounds. ChemTexts, 1, Article 6. https://doi.org/10.1007/s40828-015-0007-z
Ma, E., Yang, X., Su, Y., Bi, Z., Sun, H., Wang, B., Ma, C., & Zhang, D. (2023). High temperature oxidation behavior of Fe–3.0%Si steel with non-equilibrium reaction. Journal of Materials Research and Technology, 23, 2587–2600. https://doi.org/10.1016/j.jmrt.2023.01.163
Maurice, V., & Marcus, P. (2018). Progress in corrosion science at atomic and nanometric scales. Progres in Materials Science, 95, 132-171. https://doi.org/10.1016/j.pmatsci.2018.03.001
McMahon, M. E., Santucci Jr., R. J., Glover, C. F., Kannan, B., Walsh, Z. R. & Scully, J. R. (2019). A review of modern assessment methods for metal and metal-oxide based primers for substrate corrosion protection. Frontiers in Materials, 6, Article 190. https://doi.org/10.3389/fmats.2019.00190
Mehtani, H., Khan, M., Jaya, B. N., Parida, S., Prasad, M., & Samajdar, I. (2021). The oxidation behavior of iron-chromium alloys: The defining role of substrate chemistry on kinetics, microstructure and mechanical properties of the oxide scale. Journal of Alloys and Compounds, 871, Article 159583. https://doi.org/10.1016/j.jallcom.2021.159583
Mild Steel. (2023, August 1). Chemical composition - Mechanical properties. https://kvsteel.co.uk/steel/mild-steel.html
North, N. A., & MacLeod, I. D. (1987). Corrosion of metals. In C. Pearson (Ed.), Conservation of marine archaeological objects (pp. 68-98), Elsevier. https://doi.org/10.1016/B978-0-408-10668-9.50010-1
Ojo, A. A., & Dharmadasa, I. M. (2018). Electroplating of semiconductor materials for applications in large area electronics: A Review. Coatings, 8, 262. https://doi.org/10.3390/coatings8080262
Samui, A. & Sivaraman, P. (2010). 11 - Solid polymer electrolytes for supercapacitors. In Sequeira, C., & Santos, D. (Eds.), Polymer electrolytes fundamentals and applications (pp. 431-470). Woodhead Publishing Limited. https://doi.org/10.1533/9781845699772.2.431
Wang, H. X., Zhang, Y., Cheng, J. L., & Li, Y. S. (2015). High temperature oxidation resistance and microstructure change of aluminized coating on copper substrate. Transactions of Nonferrous Metals Society of China, 25(1), 184–190. https://doi.org/10.1016/S1003-6326(15)63594-4
Weinstein, M., Falconer, C., Doniger, W., Bailly-Salins, L., David, R., Sridharan, K., & Couet, A. (2021). Environmental degradation of electroplated nickel and copper coated SS316H in molten FLiNaK salt. Corrosion Science, 191, Article 109735. https://doi.org/10.1016/j.corsci.2021.109735
Young, D. J. (2008). High temperature oxidation and corrosion of metals (2nd ed.), Elsevier. https://doi.org/10.1016/C2014-0-00259-6
Zhang, Q., Wang, Q., Zhang, S., Lu, X., & Zhang, X. (2016). Electrodeposition in ionic liquids. ChemPhysChem, 17(3), 335-351. https://doi.org/10.1002/cphc.201500713