Keywords
How to Cite
Abstract
Examining the feasibility of a number of adhesives for bonding ceramic type SiC and Al2O3 with aramid fabric Mikroflex. Proposed sample for testing the strength of adhesive bonds these materials shear and peel strength. The study showed poorer adhesion properties of SiC ceramics. However, strength tests peel found cohesive destruction of the adhesive joints on the surface of SiC ceramics. It was assumed that the cause of such destruction can be scarfing tiles made from this material. This was confirmed by numerical calculations carried out. It follows that the failure mode of the bond (adhesive or cohesive) derives not only from the surface of the adhesive properties of the joined materials and adhesive properties, but also depends on the shape and method of loading of the glue joint, which shows the stress distribution in the adhesive joint.
This is an Open Access article distributed under the terms of the Creative Commons Attribution License CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/)
References
Cegła M., W. Habaj, P. Podgórzak. 2014. „Development of Lightweight Bulletproof Vest Inserts with Increased Protection Capability”. Problemy Mechatroniki (5): 23–33.
Godzimirski J., M. Rośkowicz, R. Gieleta. 2016. „Badania właściwości połączeń klejowych ceramiki z tkaninami antybalistycznymi”. Problemy Mechatroniki (23): 97–112.
Gonçalves D.P., F.C.L. de Melo, A.N. Klein, H.A. Al-Qureshi. 2004. “Analysis and investigation of ballistic impact on ceramic/metal, composite armour”. International Journal of Machine Tools & Manufacture (44): 307–316.
Grabowska G., J. Błaszczyk, I. Kucinska. 2009. “Resistance to Bullets, Knives, Stabs and Needles According to Current Standards, Procedures and Users’ Expectations”. Techniczne Wyroby Włókiennicze (2-3): 90–95.
Hazell P.J. 2006. “Ceramic Armour: Design and Defeat Mechanisms”. Argos Press.
Juskowiak E., R. Rybczyński, J. Kurowski, K. Jamroziak. 2012. „Koncepcja osobistej osłony balistycznej z wykorzystaniem tkanin aramidowych i węglików spiekanych”. Przetwórstwo Tworzyw (3): 217–221.
Senderski J., B. Płonka, A. Wiśniewski, Z. Witkowski. 2011. „Wielowarstwowe metalowo-ceramiczne pasywne pancerze dla helikopterów i pojazdów specjalnych”. Problemy Techniki Uzbrojenia (40): 57–64.